4100-45-OHA TITAN Conveyorized Overhead


Production Speed

  • 1-35 loads per hour
  • NOTE: Process rates will vary with load size, number of wraps & load/unload time

Load Capacity

  • Maximum load weight: Unlimited (floor supported)
  • Maximum load size: 50″ W x 50″ L (71″ max. load diagonal) x 86″ H (plus up to 4″ top overlap)
  • Minimum load size: 24″ W x 24″ L x 24″ H

Rotary Arm

  • Double flange bearing support system
  • Twin V-belt drive pulleys with belt tensioner
  • 1-12 RPM rotational speed c/w soft start acceleration
  • Final revolution deceleration and positive stop alignment
  • 1/2 HP DC variable speed motor

Film Carriage Elevator

  • 1/2 HP DC variable speed motor
  • Direct flat belt drive system
  • Maintenance free 12 point carriage guidance system

Film Delivery System

  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP DC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33 to 313% fixed stretch capability
  • Pre-stretch ratio variable by easy sprocket change
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers
  • 115 Volts 1 Phase 60 Hz 15 Amps

Automation Features

  • “All Electric – No Pneumatics Required”
  • Electro-mechanically actuated film clamp mechanism
  • Electro-mechanically actuated film tail cut/wipe arm mechanism
  • Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle

Control Features

  • PANASONIC PLC with Touchscreen Operator Interface
  • Power Off – On – Reset Switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Emergency Stop button
  • Rotary Arm Jog button
  • Film Carriage Lower/Raise buttons
  • Film Clamp Open/Close button
  • Film tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Variable rotary arm speed control
  • Triple beam auto load height sensing photo-eye, detects dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • Selectable Reduced Bottom Film Force parameter for wrapping bottom of load
  • A – B – C Wrap Program selector with capability to input and store unique wrapping parameters for each program
  • Pendant Start/Stop push-button station for remote operator control – optional lanyard or wireless remote control available
  • Stack-light beacon indicates run, clear or fault conditions
  • Rotary arm and film carriage elevator dynamic braking
  • NEMA 12 control panel and junction boxes
  • Dust tight slip ring assembly
  • Non-proprietary UL/CSA approved components

Structural Features

  • All structural steel construction
  • Integral structural steel wall/floor mounting stand
  • Electro-static powder coated paint finish

Safety Features

  • Rotary Arm Obstruction Emergency Safety Stop Sensor