4100 Hercules FS Overhead System

  • 4100_fs


Production Speed

  • 1-40 loads per hourNOTE: Process rates will vary with load size, number of wraps & forklift load/unload time

Load Capacity

  • Maximum load weight: Unlimited (floor supported)
  • Maximum load size: 56″ W x 56″ L (79″ max. load diagonal) x 80″ H (plus up to 4″ top overlap)

Rotary Arm

  • 20″ diameter ring bearing support
  • ANSI # 60 direct chain drive c/w chain tensioner
  • 3-15 RPM rotational speed c/w soft start acceleration
  • Final revolution deceleration and positive stop alignment
  • 3/4 HP DC variable speed motor

Film Carriage Elevator

  • 1/2 HP DC variable speed motor
  • ANSI # 40 direct chain drive c/w shock dampener
  • Maintenance free 12 point carriage guidance system

Film Delivery System

  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP DC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33 to 313% fixed stretch capability
  • Pre-stretch ratio variable by easy sprocket change
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers

Electrical Input Requirement

  • 115 Volts 1 Phase 60 Hz 20 Amps

Control Features

  • Simple to operate
  • PANASONIC PLC with Touchscreen Operator Interface
  • Power Off – On – Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Base or Top Wraps First wrap program
  • Reinforce Wrap control for mid-wrapping
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Rotary Arm Jog button
  • Film Carriage Lower & Raise buttons
  • Film tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Variable rotary arm speed control
  • Rotary arm and carriage elevator dynamic braking system
  • Triple beam type auto load height sensing photo-eye, detects dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program
  • NEMA 12 control panel enclosure
  • Dust tight slip ring assembly
  • Non-proprietary UL/CSA approved components

Structural Features

  • Heavy duty structural steel construction
  • Four (4) post free-standing floor mounted design
  • Electro-static powder coated paint finish

Safety Features

  • Rotary Arm Obstruction Emergency Safety Stop Sensor