HP 1100-S Turntable System

  • hp_1100x


Production Speed

  • 1-30 loads per hour (Single Turntable)
  • NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time

Load Capacity

  • Maximum load weight: 4,000 lbs dynamic – 10,000 lbs static
  • Maximum load size: 56″ W x 56″ L (79″ max. load diagonal) x 75″ H (plus up to 4″ top overlap)

Turntable

  • 48″ octagonal 5/16″ thick formed steel plate turntable
  • 4 point caster support system
  • Turntable height less than 11″ from floor
  • ANSI # 50 direct chain drive c/w chain tensioner
  • 3-12 RPM rotational speed c/w soft start acceleration
  • 1/2 HP AC variable speed motor
  • Final revolution deceleration and positive stop alignment
  • Front and back forklift ports for easy movement
  • Accu-Count exact turntable positioning system for additional film savings!

Film Carriage Elevator

  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
  • Maintenance free carriage guidance system

Film Delivery System

  • Stretch roller with manually adjusted caliper brake web tensioning system
  • Standard 20” roll width, 10” diameter
  • Carriage Descent Obstruction Safety Shut-Off Device
  • Side mounted film carriage for operator convenience and safety

Film Capacity

  • Accepts all commercial films wound on 3″ diameter cores x 20″ width
  • Accommodates damaged cores

Electrical Input Requirements

  • 115 Volts 1 Phase 60 Hz 10 Amps

Control Features

  • Electronic controls with LCD operator interface
  • Power Off – On – Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Base or Top Wraps First program
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Separate film carriage raise & lower speed controls
  • Operator programmable turntable speed control
  • Triple beam automatic load height detection sensor for dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program

Structural Features

  • All structural steel construction
  • Forklift truck portable base structure design – lifting tubes included for front and rear access
  • Structural steel tube machine tower with sheet metal covers
  • Electro-static powder coated paint finish