HP 3200 Turntable Platform


Production Speed

  • 1-40 loads per hour
  • NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time

Load Capacity

  • Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static
  • Maximum load size: 50″ W x 50″ L (71″ max. load diagonal) x 80″ H (plus up to 4″ top overlap)
  • Minimum load size: 30″ W x 30″ L x 24″ H

Turntable

  • 52″ octagonal 5/16″ thick formed steel plate turntable
  • 4 point caster support system
  • Turntable height less than 12″ from floor
  • ANSI #50 direct chain drive c/w chain tensioner
  • 3-12 RPM rotational speed c/w soft start acceleration
  • 1/2 HP AC variable speed motor
  • Final revolution deceleration and positive stop alignment
  • Front & back forklift ports for easy movement

Film Carriage Elevator

  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
  • Maintenance free carriage guidance system

Film Delivery System

  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load
  • 1/2 HP AC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33% to 313% fixed stretch capability
  • Pre-stretch ratio variable using easy sprocket change
  • Carriage Descent Obstruction Safety Shut-Off Device
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Side mounted film carriage for operator convenience and safety
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers

Electrical Input Requirements

  • 115 Volts 1 Phase 60 Hz 15 Amps

Automation Features

  • “All Electric – No Pneumatics Required”
  • Electro-mechanically actuated film clamp mechanism
  • Electro-mechanically actuated film tail cut/wipe arm mechanism
  • Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle

Control Features

  • PANASONIC PLC with Touchscreen Operator Interface
  • Power Off – On – Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Emergency Stop button
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Film Clamp Open/Close button
  • Film tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Variable turntable speed control
  • Triple beam auto load height sensing photo-eye, detects dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • Selectable Reduced Bottom Film Force parameter for wrapping bottom of load
  • A – B – C Wrap Program selector with capability to input and store unique wrapping parameters for each program
  • Wireless remote start/stop control – optional lanyard, pendant or pedestal control station available
  • NEMA 12 control panel enclosure
  • Non-proprietary UL/CSA approved components

Structural Features

  • All structural steel construction
  • Forklift truck portable base structure design – lifting tubes included for front and rear access
  • Structural steel tube machine tower with sheet metal covers
  • Electro-static powder coated paint finish