7100-65-OHA HERCULES Conveyorized Overhead

..romanische-kirchen-koeln.de.. Ich überlasse es http://www.romanische-kirchen-koeln.de/index.php?finasterid-5mg-rezeptfrei-kaufen.html Ihnen, antwortete Sam, weil jeder, wie, Max, es gibt viele fellers ist die Designer oder Buchhalter, die Babette in einer Minute heiraten würde, wenn sie einen Anteil an einer alten bekommen konnte, aber Babette wollen nicht heiraten, Max Don ' t sie? Sam erwiderte. Na ja, wenn eine Frau steht stundenlang vor dem Glas und reibt ihr Gesicht mit Gesichtscreme und Gott http://www.romanische-kirchen-koeln.de/index.php?propecia-tabletten-kaufen.html weiss, was sonst, Max, wenn sie http://www.romanische-kirchen-koeln.de/index.php?levitra-stripes-kaufen.html nicht wollen heiraten Ich möchte wissen, was ich werde die Jungs sagen, was Sie sagen wir, murmelte. Sicher, sagte Sam http://www.romanische-kirchen-koeln.de/index.php?levitra-verschreibungspflichtig.html herzlich und http://www.romanische-kirchen-koeln.de/index.php?levitra-stripes-kaufen.html sagen em auch sollten sie in eine Weile in oncet fallen und sehen Mommer und in hundertzwanzig Siebtel Street. Und sagen Sie Babette kommen, auch, Sam hinzugefügt, aber ich habe Angst, sie würde nicht deklariert. http://www.romanische-kirchen-koeln.de/index.php?viagra-25mg-online-bestellen.html

Production Speed

  • 1-65 loads per hour
  • NOTE: Process rates will vary with load size, number of wraps & conveyor speed

Load Capacity

  • Maximum load weight: 4,000 lbs dynamic – 12,000 lbs static
  • Maximum load size: 50″ W x 60″ L (79″ max. load diagonal) x 80″ H (plus up to 4″ top overlap)
  • Minimum load size: 30″ W x 30″ L x 24″ H

Rotary Arm

  • 20″ diameter ring bearing support system
  • ANSI # 60 direct chain drive c/w chain tensioner
  • 1-22 RPM rotational speed c/w soft start acceleration
  • Final revolution deceleration and positive stop alignment
  • 1 HP DC variable speed motor

Film Carriage Elevator

  • 3/4 HP DC variable speed motor
  • ANSI # 50 direct chain drive c/w shock dampeners
  • Maintenance free 12 point carriage guidance system

Film Delivery System

  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP DC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33 to 313% fixed stretch capability
  • Pre-stretch ratio variable by easy sprocket change
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers

Powered Roller Conveyor

Basic system: 5ft infeed section, 12ft Process/wrap zone section and 5ft exit section

Each section includes:

  • Chain driven live roller conveyor rated 4,000 lbs per section
  • 2-1/2″ diameter 11 gauge rollers c/w 11/16″ hex axles on 3″ centers
  • All rollers ANSI # 40 chain driven, roller to roller
  • 54″ effective roller width
  • Conveyor speeds 30 to 60 FPM (specify required speed) with electronic soft start
  • Pass-line height – 18″ from floor to top of rollers
  • 3/4 HP AC variable speed reversible TEFC motor on infeed & outfeed conveyors / 1 HP AC variable speed reversible TEFC motor on process conveyor
  • Automatic load indexing and centering by photo-eye & PLC logic

Electrical Input Requirement

  • 230 or 460 Volts 3 Phase 60 Hz 30 Amps (required voltage to be specified) (other voltages available – consult factory)

Pneumatic Requirement

  • 3 CFM @ 80 PSI clean dry pneumatic supply required
  • Filter/regulator c/w gauge & lock-out valve provided

Typical System Dimensions

  • 264″ (L) x 167″ (W) x 140″ (H) (Overall includes conveyor (L) and Control panel (W) – all dimensions approximate)

Control Features

  • Allen-Bradley MicroLogix 1400 Programmable Logic Controller (PLC) with built-in EtherNet/IP communications
  • HMI Touchscreen Operator Interface Panel
  • Illuminated Power Start / Reset button
  • Emergency Stop button
  • Wrap Cycle Start (rewrap) button
  • Manual controls provided for rotary arm jog, film carriage elevator lower/raise, film clamp open/close and conveyors forward/reverse
  • Wrap Bypass mode selector switch
  • Separate film carriage elevator raise & lower speed controls
  • Film tension (Force-to-Load) control
  • Separate 1 to 12 revolution top & bottom wrap control
  • Triple beam auto load height sensing photo-eye, detects dark or shiny loads
  • Broken film/out of film detection c/w automatic machine reset and fault beacon light
  • Rotary arm and film carriage elevator dynamic braking
  • NEMA 12 control panel and junction boxes
  • Dust tight slip ring assembly
  • Non-proprietary UL/CSA approved components

Automation Features

  • Pneumatically actuated film clamp mechanism
  • Pneumatically actuated film tail cut/wiper arm mechanism
  • Ni-chrome impulse hot wire film cut off c/w automatic periodic cleaning cycle

Structural Features

  • All structural steel construction
  • Structural tube machine tower & frame
  • Electro-static powder coated paint finish

Safety Features

  • Personnel Safety – Rotary Arm Obstruction Emergency Stop Sensor
  • Wire mesh safety barriers enclose the wrap zone to prevent personnel intrusion
  • Operator Access Gates c/w Safety Interlock Switches disable machine operation when gate(s) opened
  • Hard-wired emergency stop and operator access gate circuits with Category 3 dual channel safety relays