“The Switch” LP-SW Dual System

..oberursel.de.. Sie haben bis halb eins, nicht wahr? sie sagte, nehmen http://www.oberursel.de/generisches-viagra-deutschland/ Sie sich Zeit, Sam. Sie sollten Ihr Essen gut, vor kamagra 100 preisvergleich allem etwas, das bereits die Hälfte gehackt, wie gefГјllte Rinderbrust http://www.oberursel.de/priligy-online-bestellen/ kauen. GefГјllte Rinderbrust! Sam rief. Warum er mit seinem Messer Warum stieß, das macht immer krank. Er ausgewogen einen guten Schluck auf seiner Gabel.

Production Speed

  • 1-35 loads per hour (Single Turntable) NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time


  • Maximum load weight: 4,500 lbs dynamic – 10,000 lbs static
  • Maximum load size to safely clear other turntable: 55″ W x 55″ L (78″ load diagonal)
  • Maximum load size to remain inboard of the turntable: 46″ W x 46″ L (65″ load diagonal)
  • Maximum load height: 87″ H (plus up to 4″ top overlap)


  • 65″ diameter laser-cut steel plate with surround deck protection (qty. 2 for dual turntable)
  • Maintenance free – 48 roller bearing support system
  • Turntable height 2.75″ from floor
  • ANSI # 50 direct chain drive c/w chain tensioner
  • 3-12 RPM rotational speed c/w soft start acceleration
  • 1/2 HP AC variable speed motor (qty. 2 for dual turntable)
  • Final revolution deceleration and positive stop alignment
  • Front and back forklift ports for easy movement
  • Accu-Count exact turntable positioning system for additional film savings!
  • Optional loading ramps 60″ long x 48″ wide complete with 10″ level porch area available

Film Carriage Elevator

  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
  • Maintenance free carriage guidance system

Film Delivery System

  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP AC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33% to 313% fixed stretch capability
  • Pre-stretch ratio variable using easy sprocket change
  • Carriage Descent Obstruction Safety Shut-Off Device
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Side mounted film carriage for operator convenience and safety
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers

Electrical Input Requirements

  • 115 Volts 1 Phase 60 Hz 15 Amps

Control Features

  • Electronic controls with LCD operator interface
  • Power Off – On – Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Base or Top Wraps First program
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Turntable Jog button
  • Turntable Left/Right switch (for dual turntable systems only)
  • Film Carriage Lower & Raise buttons
  • Film Tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Operator programmable turntable speed control
  • Triple beam automatic load height detection sensor for dark or shiny loads (qty. 2 for dual turntable system)
  • Separate 1 to 12 revolution top & bottom wrap control
  • Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
  • A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program

Structural Features

  • All structural steel construction
  • Forklift truck portable base structure design – lifting tubes included for front and rear access
  • Structural steel tube machine tower with sheet metal covers
  • Electro-static powder coated paint finish